,

GIGABYTE M30 M.2 NVME PCIe 3.0 x 4 SSD 512GB

Gigabyte

GIGABYTE M30 M.2 NVME PCIe 3.0 x 4 SSD 512GB

  • Form Factor: M.2 2280
  • Interface: PCI-Express 3.0 x4, NVMe 1.3
  • Total Capacity: 512GB
  • Sequential Read Speed : up to 3500 MB/s**
  • Sequential Write speed : up to 2600 MB/s**

 10,500.00

GIGABYTE M30 M.2 NVME PCIe 3.0 x 4 SSD 512GB 

 

Xtreme Storage Performance

With the high-quality controller and flash, GIGABYTE M30 SSD can reach up to 3500 MB/sec sequential read, and up to 2600 MB/s sequential writes. Moreover, it comes with the DDR3L DRAM, SLC Cache, and advanced LDPC error correction to enhance the performance. It’s an ideal choice for gamers, PC enthusiasts, and content creators.

  •  PCIe 3.0×4, NVMe 1.3 interface
  • + SLC Cache
  • + External 2Gb DDR3L Cache
  • + Advanced LDPC error correction
  • + 2 oz PCB design for efficient thermal solution

Breaking Limitations

GIGABYTE M30 SSD delivers outstanding performance: up to 3500 MB/sec sequential read, and up to 2600 MB/s sequential write. Equipped with a robust combination of controller and 3D NAND, M30 is up to 6 times faster than SATA III Solid State Drives and reach the limit of PCIe Gen3x4.

Brand

Techncial Specifications of qGIGABYTE M30 M.2 NVME PCIe 3.0 x 4 SSD 512GB 

  • Interface
    PCIe 3.0×4, NVMe 1.3
  • Form Factor
    M.2 2280
  • Total Capacity
    512GB
  • NAND
    3D TLC NAND Flash
  • External DDR Cache
    DDR3L 2Gb
  • Sequential Read speed
    Up to 3500 MB/s
  • Sequential Write speed
    Up to 2600 MB/s
  • Random Read IOPS
    up to 350K
  • Random Write IOPS
    up to 302K
  • Dimension
    22 x 2.3 x 80 mm
  • Mean time between failure (MTBF)
    2 million hours
  • Power Consumption (Active)
    Average: R: 5.9W, W:5W
  • Power Consumption (Idle)
    L0/L0s/L1: 900mw
    L1.2 < 3mw
  • Temperature (Operating)
    0°C to 70°C
  • Temperature (Storage)
    -40°C to 85°C
  • Warranty
    • 1. Limited 5-years or 350TBW.
    • 2. Limited warranty based on 5 years or 350TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
      *TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
    • 3. When the usage of an NVME SSD as indicated by the “Percentage Used” (SMART ID: 05) in SMART page of “GIGABYTE SSD toolbox” reaches 100 means out of warranty. (A new unused product will show the number of 0)
  • Note
    • • Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
    • • Performance may vary based on SSD’s firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
    • • Speeds based on internal testing. Actual performance may vary.
    • • 1GB = 1 billion bytes. Actual useable capacity may vary.

SHOPPING CART

close